Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PLease i need help about TCAD-Silvaco ( Meshing)

Status
Not open for further replies.

jihanette

Newbie level 3
Joined
Sep 28, 2016
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
21
Hello everyone, please can someone explain to me how we mesh in Atlas or DevEdit of TCAD-Silvaco, For defining mesh in x axis and in y axis, do we use FEM finite element method to make values like the exemple for Atlas: what method do we do to define the loc and spacing , or we define them as we like ? Please I need help.


Code dot - [expand]
1
2
3
4
5
6
7
8
mesh space.mult=4.0 
#
x.mesh loc=0.0 spacing=0.25
x.mesh loc=10.0 spacing=0.25
#
y.mesh loc=0.0 spacing=0.05
y.mesh loc=5.0 spacing=0.2
y.mesh loc=10.0 spacing=0.05

 
Last edited by a moderator:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top