kshitij Bhargava
Newbie level 3
(1). I want to know how i can set a nominal , absolute and sigma value for monte carlo simulation of simple NMOS of L=0.35 u and W=10u with level-53 model parameters in HSpice tool
(2). why variations in parameters changes with different absolute variation?
(3). if i use gauss then no variation in TOX for 30 sweeps but if i use AGAUSS then variations are there. Why?
(2). why variations in parameters changes with different absolute variation?
(3). if i use gauss then no variation in TOX for 30 sweeps but if i use AGAUSS then variations are there. Why?