Please help about proramming pic 18f4431 by mikroC ..

Status
Not open for further replies.
H

hameed_76

Newbie level 1
Joined
May 30, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
libya
Activity points
1,289
Please any body help to program pic 18f4431 by micro C Language " source code " to generate 6 input PWM "pulse width modulation " to control AC motor speed.

Thank you.
 

did you mean 6 output? or you want to look at six inputs and then control the motor?
mikroC has a PWM sample in the help tab, it's actualy not hard to use, can't remember of the top of my head but it's a simple as "pwm1_Duty(parameter)", then "pwm1_start()", if your pic has 6 pwm modules each one would be assigned a number, pwm2, pwm3, etc
 

Hai.....

What type of PWM method???? Is it control Inverter ???
 

Hi,
Check here: **broken link removed**

Microchip has an app note on 3 phase induction motor control using 16F7x7. Take a look here: ww1.microchip.com/downloads/en/AppNotes/00889b.pdf

Other useful links:
ww1.microchip.com/downloads/en/AppNotes/00843a.pdf
https://ww1.microchip.com/downloads/en/AppNotes/AC Induction Motor 00984a.pdf

These should give you some idea as to how to use the PWM modules.

Hope this helps.
Tahmid.
 

help me! pic18f4431 I use microcontroller to control the inverter bridge inverters, while simulating the Proteus is a true sine wave amplitude and frequency, but any increase in voltage and decrease in cycles?I used light bulbs plugged into the light gradually brightened and then gradually fading? they did as well as circuit simulation and run it! to help him see it because the program or hardware because I have nothing wrong?

this is a simulation and program!
 

Attachments

  • nghich luu ap.zip
    7.8 MB · Views: 150

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…