Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

pin assignment in de2

Status
Not open for further replies.

showsellar

Newbie level 6
Joined
Mar 1, 2011
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,372
hello,

I am using DE2 board and quartus
I wrote a design in vhdl that include some component that each have pin assignment
of it's on and the main design should have the same pin assignment in some cases.
could I use the same assignment for ports that have the same purpose like reset and clock?
thanks in advance
 

It wasn't clear to my a month ago too (; but it's all right I solved it.

Do you know VHDL ... I am having a problem with a state machine that I had build for a car
a red signal in modelsim where it supposed to be a pwm enable and a pwm signal
 

yes..i know vhdl. some of it.

state machine that I had build for a car
a red signal in modelsim where it supposed to be a pwm enable and a pwm signal

what you mean by car? red signal in modelsim? pwm?
i dont get it..

if is not related to the thread title, then can you post another thread for it?
 

I have opend I new thred named "modelsim bad signals "
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top