Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] PICKIT3 is not working

Status
Not open for further replies.

SKM

Newbie level 3
Joined
Oct 1, 2016
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
28
My PICKIT3 stopped working. When i try to use pickit3, voltage is not coming from Vdd and Vss pin. I am getting a error message
"Target device was not found (could not detect target voltage VDD). You must connect to a target device to use PICkit 3. Target has invalid calibration data (0x00)."

Can anyone help me how to resolve this problem?

- - - Updated - - -

My PICKIT3 stopped working. When i try to use pickit3, voltage is not coming from Vdd and Vss pin. I am getting a error message
"Target device was not found (could not detect target voltage VDD). You must connect to a target device to use PICkit 3. Target has invalid calibration data (0x00)."

Can anyone help me how to resolve this problem?

I resolved this problem. Just restart MPLA IPE and try connecting with pic.

Thank you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top