Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

picall software problem v0.12e and v0.14beta

Status
Not open for further replies.
H

hakan

Member level 2
Joined
Feb 20, 2002
Messages
47
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
340
picall software

i've bought a pic16pro programer. and i want to use it with picall software but it does not work.

i checked all hardware and tested pin by pin. hardware is o.k. i use win-xp. while i was testing hardware, software gave response. i tried it with hardware test buttons.

is there anybody there who have exparience in picall software?
does it realy work or not?
do you have another better solution to use picpro hardware with?
 

Attachments

  • p16pro.pdf
    104.8 KB · Views: 97

programa picall

The topic is all ready replyed by two members where you post it

MICROCONTROLLER DESIGN

regards
fragrance
 

Pic16pro programmer work very fine

Incrase Time delay in:

Settings>Hardware Setup/Test

First disible AutoAdjust

Incrase Prog Delay
Incrase MS_Prog_Delay

Tune this values and find good values for your PC

Cable to PC long aboat 1m is OK

On my PC ( 500MHz ).
Prog Delay=4
MS_Prog_Delay=120
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top