Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[PIC] PIC32MX150 with KS0108 GLCD problem

Status
Not open for further replies.

Rtk89

Newbie level 6
Joined
Nov 15, 2013
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
85
Dear All,

In my project I am using a PIC32MX150F128B microcontroller with a KS0108B based graphic LCD and using MikroC PRO for PIC32 to write source.
I can draw bitmap or write text without problem, but when I use the Glcd_dot(), Glcd_rectangle(), Glcd_circle()..etc functions, I get bed results.
In pictures:
Glcd_rectangle();
Glcd_Dot();
Glcd_Fill(0x00);
Glcd_Image(); (It is right result)

I try to find the mistake for a week, but now I don't have an idea. Please help me somebody.
Here is my code:

Code:
sbit GLCD_D0 at RB7_bit;
sbit GLCD_D1 at RB8_bit;
sbit GLCD_D2 at RB9_bit;
sbit GLCD_D3 at RB10_bit;
sbit GLCD_D4 at RB12_bit;
sbit GLCD_D5 at RB13_bit;
sbit GLCD_D6 at RB14_bit;
sbit GLCD_D7 at RB15_bit;

sbit GLCD_D0_Direction at TRISB7_bit;
sbit GLCD_D1_Direction at TRISB8_bit;
sbit GLCD_D2_Direction at TRISB9_bit;
sbit GLCD_D3_Direction at TRISB10_bit;
sbit GLCD_D4_Direction at TRISB12_bit;
sbit GLCD_D5_Direction at TRISB13_bit;
sbit GLCD_D6_Direction at TRISB14_bit;
sbit GLCD_D7_Direction at TRISB15_bit;


sbit GLCD_CS1 at RB5_bit;
sbit GLCD_CS2 at RB4_bit;
sbit GLCD_RS at RB3_bit;
sbit GLCD_RW at RB1_bit;
sbit GLCD_EN at RB6_bit;
sbit GLCD_RST at RB11_bit;

sbit GLCD_CS1_Direction at TRISB5_bit;
sbit GLCD_CS2_Direction at TRISB4_bit;
sbit GLCD_RS_Direction at TRISB3_bit;
sbit GLCD_RW_Direction at TRISB1_bit;
sbit GLCD_EN_Direction at TRISB6_bit;
sbit GLCD_RST_Direction at TRISB11_bit;

void Glcd_Write_Text(char *text, unsigned short x_pos, unsigned short page_num, unsigned short color);
void Glcd_Dot(unsigned short x_pos, unsigned short y_pos, unsigned short color);
void Glcd_Fill(unsigned short pattern);
void Glcd_Rectangle(unsigned short x_upper_left, unsigned short y_upper_left, unsigned short x_bottom_right, unsigned short y_bottom_right, unsigned short color)

void main() {
    PORTA = 0x0000;
    PORTB = 0x0000;
  
 
    ANSELA = 1;
    ANSELB = 0;
    
    TRISA = 1;
    TRISB = 0;          

    JTAGEN_bit = 0;  
    Glcd_Init();                                  
    Glcd_Fill(0x00);                               /
    ADC1_Init();

do{
Glcd_Dot(30,30,1);
Delay_ms(1000);
Glcd_Rectangle(5, 5, 40, 40, 1);
Delay_ms(1000);
Glcd_Fill(0x00);  
Delay_ms(1000);
}while(1);

}
;
 

Maybe there are another GLCD library file for mikroC, what I can use with PIC32MX150?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top