Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Pic16f877 registers for interrupts
- Thread starter pkp044
- Start date
- Status
qwertyuiop415263
Full Member level 4
these registers are used to configure the CCP(Capture Compre PWM) Module of pic 16f877. See the section 8.0 of pic16f877's datasheet
hope it helps
hope it helps
hamed8419215
Member level 5
hi pkp;
T1CON controls operation of timer1 and CCP1CON controls operation of CCP1 module. CCPR1L and CCPR1H registers are associated wit CCP1 module. as they are coming together i think that the propose is to using CCP1 module for either Capture mode or Compare mode.
T1CON controls operation of timer1 and CCP1CON controls operation of CCP1 module. CCPR1L and CCPR1H registers are associated wit CCP1 module. as they are coming together i think that the propose is to using CCP1 module for either Capture mode or Compare mode.
dayanpad
Advanced Member level 4
Dear what kind of help you need
Try to read this link
Chapter 3: PIC16F887 Microcontroller - Book: PIC Microcontrollers - Programming in C
- Status
