Nov 4, 2017 #1 S Sborbel Newbie level 2 Joined Nov 3, 2017 Messages 2 Helped 0 Reputation 0 Reaction score 0 Trophy points 1 Activity points 19 Hi guys a new to this forum hoping I could get some assistance. Firstly I would like to explain of my device I currently have a device that has a PIC12F675 I/SN 1505 The device is basically a photoresistor catch and release device using a servo to open and close running of a 3.7 lipo battery 1. Is it possible to read the PIC12F675 from the board with out removing it ? 2. Can someone assist in helping me code a PIC12F675 to do such where by using the photoresistor as the trigger to open and close the servo. ?
Hi guys a new to this forum hoping I could get some assistance. Firstly I would like to explain of my device I currently have a device that has a PIC12F675 I/SN 1505 The device is basically a photoresistor catch and release device using a servo to open and close running of a 3.7 lipo battery 1. Is it possible to read the PIC12F675 from the board with out removing it ? 2. Can someone assist in helping me code a PIC12F675 to do such where by using the photoresistor as the trigger to open and close the servo. ?
Nov 4, 2017 #2 nagkiller Full Member level 4 Joined Jul 9, 2009 Messages 238 Helped 37 Reputation 74 Reaction score 37 Trophy points 1,308 Location Brazil Activity points 2,703 1 - You can put a ICSP connector (pin header 5x1). Like this: 2 - Show what you have done in your code, compiler used, etc...
1 - You can put a ICSP connector (pin header 5x1). Like this: 2 - Show what you have done in your code, compiler used, etc...
Nov 4, 2017 #3 Easyrider83 Advanced Member level 5 Joined Oct 11, 2011 Messages 1,608 Helped 374 Reputation 748 Reaction score 363 Trophy points 1,363 Location Tallinn, Estonia Activity points 8,575 If it is not your device, 100% it will be protected from reading.
Nov 4, 2017 #4 S Sborbel Newbie level 2 Joined Nov 3, 2017 Messages 2 Helped 0 Reputation 0 Reaction score 0 Trophy points 1 Activity points 19 Thank you I will have to try this and check .I will report back If the chip is protected if I still read it will it affect the chip ? . Can someone assist in helping me code a PIC12F675 to do such where by using the photoresistor as the trigger to open and close the servo.
Thank you I will have to try this and check .I will report back If the chip is protected if I still read it will it affect the chip ? . Can someone assist in helping me code a PIC12F675 to do such where by using the photoresistor as the trigger to open and close the servo.
Nov 5, 2017 #5 nagkiller Full Member level 4 Joined Jul 9, 2009 Messages 238 Helped 37 Reputation 74 Reaction score 37 Trophy points 1,308 Location Brazil Activity points 2,703 You cannot read a protected mcu!!! You may post what you have done in your code, compiler used, etc... so we can help you!!! If you want someone to make it for you, hire it!!! There is always someone who can create the project for you!!! Get started learning how AD converter works... how write code into mcu, etc...
You cannot read a protected mcu!!! You may post what you have done in your code, compiler used, etc... so we can help you!!! If you want someone to make it for you, hire it!!! There is always someone who can create the project for you!!! Get started learning how AD converter works... how write code into mcu, etc...
Nov 9, 2017 #6 baileychic Advanced Member level 3 Joined Aug 2, 2017 Messages 728 Helped 56 Reputation 112 Reaction score 57 Trophy points 28 Activity points 7,033 Yes, I can help you in writing the code.