Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC10F206 GPWUF flag problem

Status
Not open for further replies.
A

AlGeorge

Member level 1
Joined
Nov 17, 2009
Messages
39
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Waihi Beach
Activity points
1,606
Hi with WDT enabled;
OPTION=0x3f;

When GPIO change, there is no set bit eg only wakeup is by WDTtimeout:
After wakeup and pin change the following is always 0:
if (GPWUF==0) goto wdt;

Anyone?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top