Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Please explain what you mean by stand-alone? Have you got a compiler? You also need a programmer- and a PC to program.i want to program pic 12f675 using pic 12f675 using stand-alone any one have information about it
noHi,
did I understand correctly?
You have two PICs. Let´s say pic_A and pic_B-
pic_A is the first one... obviously you need some kind of external programmer to put the code into it.
Then you want to connect pic_A and pic_B (please upload a draft about the connections) and you want pic_A to program pic_B with the code that already exists in pic_A.
If so: How do you "initiate" the programming cycle?
***
So the PIC needs to have some code to act as "programmer". But I guess this is not the only code, there will be some additional "application" code.
How do you intend to switch between these two code parts?
Klaus
I don' t do a search for you. It´s your job to provide informations.it's available for arduino you can search as reference.
I still do not get it. But let me try.standalone means microcontroller's program copy and paste to other same microcontroller using some hardware connection in which you don't need pc
Still confusing but now I think you are asking for a production programmer. One where you insert a PIC in one socket and it gets read then you insert as many new devices as you want and the code is copied into them. 'Stand alone' copiers certainly exist but they are fairly complex products with their own operating systems inside. You still need to confirm the source device isn't copy protected first.in large production of some product using microcontroller they program like that no need to pc.
That is not a reasonable thing to try to do. When you compile the code, it needs to know exactly where each register is in memory - and in the case of the PIC12 and PIC16 families which bank the register lives in. There is no guarantee that any particular register will have the same address in the same family, let alone across families.1 make 1 led controller program for pic12f675 but i like to burn this .hex file in many pic12f675 by any pic 12f ,16f, 18f,instead of my computer so this programming called stand alone programmer for program pic12f675
any how to make it?Make yourself PicKit2 clone with PIC18F2550 and 2 serial EEPROMs on board. Load the EEPROMs with your .hex and with press of a button you can program as many controllers without using a PC.