Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

pic BANKS- what are bank 2 and 3 used for?

Status
Not open for further replies.

newbie111

Member level 2
Joined
Nov 29, 2009
Messages
51
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
h.k
Activity points
1,609
pic BANKS

pic84 has bank 0 and bank 1 only

the pic 16f790 has 4 banks
bank 0-4

my question is

what are bank 2 and 3 used for?


Thanks
 

Re: pic BANKS

Hi,


The Banks are RAM memory shared by the System and User File Registers.

The more powerfull the chip the more RAM memory / Banks the chips have.

On the 16F chips each bank is typically adressed as 128 bytes although not all 128 bytes in each Bank are available, dependant on the individual chip.

See the respective chips datasheet chart showing the SFR table in the Memory section.
 

pic BANKS

Bank is the technique to enhance the RAM Memory range...

if you have More Flash Memory,More Lines of Code you can store,it needs More RAM to store Data variable

with 8-bit address you can address only 256 byte but bank technique allows you to enhance RAM memory range dependent on the Chip..

_
is it Helps you
 

    newbie111

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top