[SOLVED] pic 12f675 internal oscillator calibration settings?

[welove8051]

hello pic geeks,
i want to use 12f675 with out xtal osc. i have problem with int osc settings in mplab. if i use mikroc pro for programming 12f675 with internal osc, do i still need to set the osc settings by myself or the software will do it by it self.

thanks in advance

 

[milan.rajik]

If you use mikroC then you don't have to set it in code but select INTOSC with IO function on... option. If you use MPLAB with its supporting compilers then you can set in code using __CONFIG() in Hi-Tech PICC and #pragma config... in XC8 compilers. If you don't want to set in code then you can set it in IDE Configure>Configuration bits... menu item.

 

[wp100]

Hi,

Suggest you read and follow this good tip http://picprojects.org.uk/projects/piccal.htm

 

[welove8051]

thanks dudes. i am using pickkit2 and with it we can easily set the osc calibration bits. its so simple