Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Philips chassis L9.2A error code 12

Status
Not open for further replies.
tendi

tendi

Member level 5
Joined
Jan 26, 2006
Messages
86
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Location
zimbabwe
Activity points
1,851
l9.2a + tips

This philips tv runs for about 10 seconds and turns off into stand-by. A service-mode check shows error 12000 in the error buffer. I have encountered numerous philips L9.2 tv's with this fault and I have not been able to figure out what exactly to replace in order to clear this fault. By the way error 12 refers to "black current loop instability". Does anybody know how to tackle this??

tendi...
 

l9.2a chassis

I found the problem. it was the crt. i replaced it was ok.
thanks everyone.

Added after 25 seconds:

I found the problem. it was the crt. i replaced it and the tv was ok.
thanks everyone.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top