Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST Microwave

CST Microwave

Quick Overview

Category
Uncategorized
Language
Total members
164
Total events
0
Total discussions
35
Total views
2K
Total albums
0

Phase and attenuation constant of 1-D periodic structure using CST or HFSS

xysean

Newbie level 5
Joined
Jun 29, 2012
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,348
Hi,

I intend to plot B/ko and a/ko plots of this paper through simulation either in CST or HFSS. The plots are shown in figure 5 of the paper (link below). The link to implementation of this antenna in CST is below as well. I have come across alot of answers but none of them seem to give me the right plot and at this point, I am not sure which one of them is right. I have tried eigenmode solver using slow-wave example, frequency domain solver has a gamma plot but normalizing it through ko doesn't give the right response either. Also, I have plotted in HFSS using floquet ports. and I have tried to use the formula [acos(((1-s(1,1)*s(2,2)+s(1,2)*s(2,1)))/2/s(2,1)) ]. Please assist me on this. Thanks.

Paper: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8754760

Implementation of paper in CST: https://drive.google.com/drive/u/0/folders/1cfI7ai86WpdBdtN9uZoWMtLg_KDUzjaj
 

Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top