Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

pci spec differences between 2.0/2.1/2.2/2.3 help is needed.

Status
Not open for further replies.

hawk

Member level 4
Joined
Nov 27, 2001
Messages
76
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
384
Hi fox,
need help to get the differences between pci 2.0/2.1/2.2/2.3
specifications.

lots of regards,
Hawk. :?
 

This pdf summarizes differences between 2.2 and 2.3.
Hope this helps.
You can find full 2.2 and 2.1 specs on MCU Fileman.
If you can't find 2.3 on this board then ask here and I or someone
else will post them here.
Greets,

sgrudu.


PS
I think we can safely move this topic to
" Microcontroller networking and PC interfacing" forum
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top