PCB with burried capacitance and the type of dielectric mat

Status
Not open for further replies.
D

dmd4raj

Member level 4
Joined
Jun 23, 2008
Messages
69
Helped
11
Reputation
22
Reaction score
7
Trophy points
1,288
Activity points
1,722
How to design a PCB with burried capacitance and the type of dielectric materials used for the design....pls let me know how to implement this and how to guide the fabrication unit and what are the parameters that should be given to FAB house..

Regards
Rajan.k
 

Re: Burried capacitor in PCB

your board fabricator should have all that information.
 

Burried capacitor in PCB

Hi,
If you have for example a multi layer board, usually you can apply between two layers (GND & some supply voltages)a very thin internal layer (basic material of for ex.) 100um thickness, and calculate as a normal capacitor with plate surface of Xcm x Ycm & distance (thickness of dielectricum) 100umeter...
Epsilon-rel is of FR4 (typical_hell brown_ PCB material) so at 4.5, you will realize: its value is not so high_may be par teens to hundred picofarad.
K.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…