robismyname
Full Member level 6
- Joined
- Jan 17, 2008
- Messages
- 390
- Helped
- 11
- Reputation
- 22
- Reaction score
- 9
- Trophy points
- 1,298
- Location
- Central Florida
- Activity points
- 4,603
Im looking at using a "green-ecofriendly" board material. 862 HF and 86P HF for a radio design in 2.4 GHz.
Considering permittivity, loss tangent spec of the board (see attached) is this a good material for my application? What other parameters should I be looking at in the specs?
Considering permittivity, loss tangent spec of the board (see attached) is this a good material for my application? What other parameters should I be looking at in the specs?