Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PCB Desoldering Tools

Status
Not open for further replies.
J

jimmykk

Full Member level 3
Joined
Oct 2, 2014
Messages
158
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,298
Activity points
2,863
Hi

I am looking for some desoldering tools that can be used to desolder packages like Plastic-DFN, Power Pak SO-8, LFCSP as shown below:
LFCSP.JPG
PDFN.JPG
POWERPAK.JPG


I know that these packages require placing the PCB on a warm air blower for a while before starting the desoldering process and then use a hot air desoldering gun to desolder it.
But i am looking for some other tools that can be used to remove these chips safely.
Any suggestions would be appreciated.
 

Sort by date Sort by votes
I doubt that the low-temperature solder alloy will work for packages with exposed pad. You absolutely need hot air for rework.

Preheating is generally helpful to reduce thermal stress, but only mandatory for boards with massive copper planes.
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top