Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The pins of the pic used for the debug are RB6, RB7 and RB3. So you can't use this pin for normal IO.
Be careful with the led on the "ICD module", you must have 13V on VPP. The direct voltage of the led define the VPP voltage. Your must have #2V led.