PCB and firmware of Ulink2 clone

[folks]

ulink2 clone

Here is Ulink2 clone but I do not have enough points to download the pcb:


**broken link removed**

https://i202.photobucket.com/albums/aa16/Folksoter/showimgasp.jpg?t=1210046027

 

[folks]

ulink clone

123456 say: Do you have firmware?

kewxke say: IMPOSSIBLE firmware is currently out of it.

Does anyone know how I get?
Is like ICD2 of Microchip?

 

[KST]

ulink2 firmware

Here is Ulink2 clone but I do not have enough points to download the pcb:


**broken link removed**

https://i202.photobucket.com/albums/aa16/Folksoter/showimgasp.jpg?t=1210046027

Do you have got the firmware or Anybody ???

 

[KST]

ulink-me clone

Anybody?

sorry ! My English is not good, I need firmware for ULINK2. Thank.

 

[altipatlar006]

ulink2 schematics

https://www.keil.com/support/man/docs/ulink2/ulink2_su_driver.htm

On above link;Keil says that no additional specific driver is needed.Thus for my opinion,Keil got bored from cloned ulink copies thus wrote its own driver code for upgraded ulink-->ulink 2

 

[kiano]

lpc2148 ulink2


i am only 0.5 point, i need download PIC Programmer ...

 

[duker1231]

ulink2

ok...there seems to be a confusion....and please let this thread be linited to the ulink2 clone....if u want a debugger for pic search in another thread or open up a new 1 but please dont curropt this thread....

now for the confusion to be cleared:---
see the thing is when the ulink2 is connected to the pc it recognises itself as a human interface device and the lpc2148 chip contains some code in it's rom ...this code tells keil that the ulink2 module connected to it is original or not....this is wot we mean by firmware on the microcontroller side...now we need to work on this firmware.....
steps:
(1)--how to make the lpc2148 recognise itself as a HID under windows.
(2)how to make keil software realise that the ulink2 connected to it is an original 1...

any ideas???????

 

[ethernet_micro]

ulink-me schematic

I want ULINK2 Firmware for LPC2148 HEX Flash Programming or step by step ULINK2 Setup

 

[ark08]

keil ulink2 clone

Hi,
thank you folks for the schematics.
Two of our ulink2 has broken down.
Probably One has schematics as you gave.
The other one has another ic just near the usb connector,which is named as ic7.
This ic in SOT23-5 package, and has "UL26" top side marking.
When we programming a device it has burned.I want to change this ic.
Does anyone has any suggestions.What is this ic ?

Thanks

 

[folks]

ulink2 clone buy

Hi,
thank you folks for the schematics.
Two of our ulink2 has broken down.
Probably One has schematics as you gave.
The other one has another ic just near the usb connector,which is named as ic7.
This ic in SOT23-5 package, and has "UL26" top side marking.
When we programming a device it has burned.I want to change this ic.
Does anyone has any suggestions.What is this ic ?

Thanks

Hi.

USBLC6-2 "ESD PROTECTION"

 

[browlie]

ulink2 firmware update

Hello Folks
Does you found the FW.

Embest have made a bord with the ulink-me module.
**broken link removed**

 

[ark08]

ulink hex

Hi, thank you folks

 

[avrvi]

ulink clone schematic

Find a place sold ulink2 clone,

**broken link removed**

 

[necywong]

Re: Ulink2 clone

There is ARM Ulink2 with low price! Welcome to bid!
http://myworld.ebay.com/necywong

ARM ULINK2 USB-JTAG Adapter
**broken link removed**

 

[7rots51]

Re: Ulink2 clone

warning:
Be careful about buy avrvi ulink2,I can not upgrade it with newer compiler keil ver4.03 so it is useless !

**broken link removed**