Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PC based oscilloscope project.

Status
Not open for further replies.

Raza

Advanced Member level 3
Joined
Feb 10, 2002
Messages
828
Helped
266
Reputation
530
Reaction score
259
Trophy points
1,343
Location
PAK
Activity points
4,486
Hi,
PIC18F2550 based Oscilloscope
Pc based oscilloscope
PC Based Oscilloscope Project
Looking for a PC based USB 2.0 Oscilloscope Project
PC based oscilloscope
All these above referred post either are unavailable pages or incomplete projects.
Can any one suggest me reference for complete practically producible with reasonable cost of this project including PC boards and layout.
 

All you need is schemaics and hex code which are available. Circuit is simple, it can be assembled even on a vero board
Would a sound card based oscilloscope/spectrum analyzer/signal generator be a better choice for audio test & measurement? The reason is that a good sound card can provide 192kHz sampling rate, 24 bit ADC and DAC, very good SNR, THD, IMD....which is essential for HIFI testing.



Buffer Hardware for xoscope
http://cmccord.co.uk/FYP/DownLoad/Final_Report.pdf

Full project including pcb......
Microcontroller Projects: Two-Channel PC Based Oscilloscope USB

A simple scope using printer port on old computers, better make it stand alone for workshop.....
**broken link removed**
 
Last edited:
  • Like
Reactions: Raza

    Raza

    Points: 2
    Helpful Answer Positive Rating
Hi alert,
Thanks, I downloaded the SW, will assemble the Buffer input stage and check.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top