Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Patch antenna simulation with IE3D

Status
Not open for further replies.

clark09

Newbie level 3
Joined
Jun 30, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,304
patch antenna simulation example by ie3d

Hi all!
I'm new with simulation and antenna design. I'm triying to simulate a probe-fed rectangular patch antenna on a finite ground plane.
I designed this antenna by transmission line model using fiberglass as dielectric substrate with Er=4.4 and h=1.52mm.
The size of this patch is L=29.47mm and W=38.03mm. The size of the ground plane is Lg=38.59mm and Wg=47.15mm.
I tried to simulate this antenna, but i cannot get it to work... Please! If someone could give some feedback and help me I would be very grateful.
I added my .geo file and a description of all the steps i followed using IE3D.
Thanks a lot.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top