Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

passband and stop band edges for digital FIR filter bank using MATLAB

Status
Not open for further replies.
O

oz560

Newbie level 1
Joined
Apr 1, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
hi everyone...

I am trying to design a non-uniform digital FIR filter bank and i am using Parks McClellan algorithm to design each bandpass filter. I know lower and upper cut-off frequencies(wc1=(wp1+ws1)/2 and wc2=(wp2+ws2)/2). I also know attenuation in stopband(60db) and passband(1db).

I have problem of selecting passband and stop band cut-off edges from the above available parameter. Can anyone suggest me a solution?


Thanks in advance


Regards,
oz560
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top