Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

parabolic antenna wmesh dish vs. smooth dish

Status
Not open for further replies.

al_cloudps

Newbie level 3
Joined
Jan 20, 2010
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,308
parabolic antenna

Hi, i want to build a DIY parabolic antenna. May I know what is the difference between mesh dish and smooth dish? Is the dimension of the parabolic essential, any relationship with the frequency?? I heard a large dish is good. My antenna has to work with 2.45GHz.
 

parabolic antenna

You probably need a lecture on reflector antenna to cover all the questions. To my best of knowledge:

1)Mesh generally have higher sidelobes then smooth. But mesh are lighter and less wind loading.

2) Dimension (focal distance, aperature area) determines the overall gain, feed horn requirement and ... ...

3) Large dish == high gain (if design properly)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top