Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Panasonic PT-AX100e LCD projector died

Status
Not open for further replies.

mzypt

Junior Member level 2
Joined
Apr 8, 2007
Messages
23
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,452
panasonic pt ax 100e

Yep...my projector died. More specificly the Lamp HV power supply broke down. Or that what I assume since no voltage is coming to lamp connectors at startup.
Service manual or schematics would be great help. Any help appreciated

Thanks,
Mark
 

mzypt

Junior Member level 2
Joined
Apr 8, 2007
Messages
23
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,452
Well..the defected part was not the lamp drive. It was the main power supply.
And it was only partly broken. The stanbd by 3.3V supply was still working so it appears to be OK. But when pushing the ON button it didn't start the main supply at all. Couldn't find the defected pars so I had to replace the whole powersupply card...it was sometring around 125$US.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top