Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pairing with CSR BLE 4.0 dongle

Status
Not open for further replies.
N

nahidalam

Junior Member level 3
Joined
Apr 27, 2011
Messages
27
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,522
I have a CSR4.0 BLE dongle I am using in Raspberry Pi. I am using Bluez stack in the Pi and can make the dongle up & running. Now, when I use some iOS app (LightBlue) to find out nearby BLE devices, most of the time it can't find the CSR device.

A few times the app can find the CSR device, but when I press CSR name in the app, the app tries to connect to the CSR dongle but fails. Then the dongle becomes invisible.

Any thought on why this happens? How can I reliably find the CSR dongle? And how can I connect to it? Do I need to write some BLE application code to run on the Raspberry Pi?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top