Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Paint for the dish antennas

Status
Not open for further replies.

Bob60

Full Member level 3
Joined
Apr 23, 2010
Messages
188
Helped
39
Reputation
78
Reaction score
37
Trophy points
1,308
Location
Ozz
Activity points
2,162
Hello!
Does anybody know some friendly for HF ( up to 10GHz ) paint with tangents delta below 0.02 @ ~ 2GHz, epsilon around 4 @ ~ 2GHz, for dish antenna staff. Any suggestions from Andrew, Mars and ets will be appreciate.
Kind regards
 

Hello!
Does anybody know some friendly for HF ( up to 10GHz ) paint with tangents delta below 0.02 @ ~ 2GHz, epsilon around 4 @ ~ 2GHz, for dish antenna staff. Any suggestions from Andrew, Mars and ets will be appreciate.
Kind regards

To my knowledge any paint can be used for 2 GHz parabolic dish. The thin layer does not affect the performance.
Caution , do not use aluminum-filled varnishes. As the particles of aluminum powder are not connected but insulated, if used on a parabolic dish it makes it not focusing.

One of the problems with antennas for satellite communication is that parabolic surface reflects heat to the LNB in focus. Special paint compositions absorbing IR heat are recommended.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top