Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PADS2007 part loading problem

Status
Not open for further replies.
8

807fm

Newbie level 6
Joined
Oct 14, 2005
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,344
When I try to load part from library which is already on the board...example 10K(but with different decal) I got message "part type already exist in design---loading from library is skipped---design's part will be used".Can I bypass somehow this action and load it from library(with another decal) ???
any comment??
 

No there is not a way as long as i know and according to the document. You should create a new part for new decal like 10k_second etc...

Actually you should also use generic parts and change attributes instead of decals. E.g. for 10k/0.125W use RES-1/8W part, change part value to 10k and for 10k/1W use RES-1W part, change part value to 10k etc.
 

tnx seyyah...I read carefully manual and same conclusion here...:cry:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top