Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

(P)Spice Model wanted

Status
Not open for further replies.

Vauxdvihl

Member level 5
Joined
Dec 31, 1999
Messages
94
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
611
dc motor spice model

Hi friends,

i search a spice model for a "brushless dc motor".
I will use it to simulate a sensorless brushless dc motor control unit.

Thanks a lot

Regards
 

dc motor spice

Hi friend!

I have bee looking for the same now for a week . I have found several DC models but all are very much the same I need a tachometer output as pulses .. so i modified this model
This is one of the most complete that i found .. Now i trying to get the mechatronics lib from INTUSOFT i think that one is pretty good
If you find it .let me know ..

.SUBCKT MOTOR 1 2 3 4 5 PARAMS:RA=1M LA=1NH KE=7.06M KT=1 JM=1P
+ BM=1N KTC=1M KS=1G BKS=1N
+ CONV=.10472
* DC MOTOR WITH ARMATURE CONTROL
* NODE 1 IS POSITIVE MOTOR ARMATURE VOLTAGE
* NODE 2 IS NEGATIVE MOTOR ARMATURE VOLTAGE
* NODE 3 IS MOTOR SHAFT SPEED IN RAD/SEC RELATIVE TO SPACE
* NODE 4 IS MOTOR PLATFORM SPEED IN RAD/SEC RELATIVE TO SPACE
* NODE 0 IS SPACE REFERENCE
* NODE 5 IS TACH OUTPUT IN VOLTS OF MOTOR SPEED RELATIVE TO PLATFORM
* CURRENT OUT OF NODE 3 IS TORQUE DELIVERED IN OZ-IN
* UNITS : OZ,IN,RAD/SEC
* RA IS ARMATURE RESISTANCE IN OHMS
* LA IS ARMATURE INDUCTANCE IN HENRIES
* KE IS MOTOR BACK EMF CONSTANT IN VOLTS/RAD/SEC
* KT IS MOTOR TORQUE CONSTANT IN OZ-IN/AMP
* JM IS MOTOR INERTIA IN OZ-IN-SEC/RAD/SEC
* BM IS MOTOR VISCOUS FRICTION IN OZ-IN/RAD/SEC
* KS IS MOTOR SPRING CONSTANT IN OZ-IN/RAD
* BKS IS SHAFT SPRING DAMPING IN OZ-IN/RAD/SEC
* KTC IS TACHOMETER GAIN CONSTANT IN VOLTS/RPM
* CONV IS RPM TO RAD/SEC CONVERSION CONSTANT = 2PI/60
RA 1 8 {RA}
LA 8 6 {LA}
VA 6 7
EB 7 2 VALUE = {KE*V(9,4)}
GTM 4 9 VALUE = {KT*I(VA)}
CJM 9 0 {JM}
RBM 9 4 {1/BM}
LKS 9 3 {1/KS}
RKS 9 3 {1/BKS}
ETC 5 0 VALUE = {KTC*V(3,4)/CONV}
RTC 5 0 1G
RL 3 4 1G
.ENDS MOTOR
 

bldc spice

Hi,

such a model is included in Pspice Libraries (Orcad Version 9.2)
You'll find it in the model library mix_misc.slb
It name is simply BLDCM.
This model include all the parameter that are important for a BLDC Motor.

A simulation example is also include in ..\Pspice\schematics_sample\mixsim\motordrv\...

Bye reiniheini
 

pspice motor model

Have you ever tried to simulate this schematic ?

I always get the Error Message

I/O ERROR -- Unable to open stimulus file "motor.stm".... :oops:
 

spice brushless model

hi Vauxdvihl

yes, i`ve simulated this schematic...
Usually this file should be in the directory where the schematic file is.

But something seems to be happen with your file....

Try that one I enclosed to this post!

Regards reiniheini
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top