Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Oscillator Simulation in ADS!

Status
Not open for further replies.

dopradar

Member level 5
Joined
Oct 8, 2004
Messages
83
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
761
Hi all,

Please help me solve this simulation problem of 3rd overtone oscillator in ADS. It can't work in the ADS simulation. and I am attaching the project in the following. Thanks in advance!
 

it worked now with me

what i have done ?

1 ) the frequency setting the fundamental is 72 MHz
2) i changed the output node " the collector not the emitter"
3) changed the direction of the of oscillation probe

i will upload the modified project
 
  • Like
Reactions: MOHSEN15

    dopradar

    Points: 2
    Helpful Answer Positive Rating

    MOHSEN15

    Points: 2
    Helpful Answer Positive Rating
Thanks, Khouly.

But here I also have some questions:

1) why the frequency setting is 72MHz not 24MHz? because the resonant RLC works at about 24MHz, I want to watch the harmonics amplitude of 24MHz.

2) why the output node is "collector" not "emitter"? Because on the PCB circult, the output from emitter can work but output from collector can't work.
Note: on the PCB circuit,I replace the C1,C2,L1,R2 to 24MHz crystal!
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top