[SOLVED] OrCAD urgent help.. Exporting netlist

[lockman_akim]

i have capturing the schematic by using Design Entry CIS..
some of my component is in company library server, some created by my self..
the problem is, when i exporting netlist, that have few warning

#1 Warning [ALG0016] Part Name "CAP_NP_CC0805_OV_DISCRETE_0.94MM_150-75038_20PF" is renamed to "CAP_NP_CC0805_OV_DISCRETE_0.94M".
#2 Warning [ALG0016] Part Name "CAP_POL_C250_RAD_POL_DISCRETE_11.4MM_150-78452_10UF" is renamed to "CAP_POL_C250_RAD_POL_DISCRETE_1".
#3 Warning [ALG0016] Part Name "CAP_NP_CC0805_OV_DISCRETE_1.4MM_150-77976_10UF" is renamed to "CAP_NP_CC0805_OV_DISCRETE_1.4MM".
#4 Warning [ALG0016] Part Name "DIODE_SOD323_IC_1.05MM_480-75133_1N4148WS" is renamed to "DIODE_SOD323_IC_1.05MM_480-7513".

and after import the netlist to the PCB editor, it jave 20 error of this

WARNING(SPMHNI-194): Symbol 'XTL2_HCM49' for device 'XTAL_XTL2_HCM49_IC_4.3MM_230-30' not found in PSMPATH or must be "dbdoctor"ed.

(just name of component change)

what is the factor of this problem? how to solve?

 

[mfarooq1]

hi,
i think the component names are too long.
try to rename any of the component to a shorter length.

 

[Vamsi115]

Yes..
mfarooq was right try to rename the component with less than 30 characters.

Vamsi.

 

[shipla]

hi,

maybe .psm file is not present in the library.Open and save the footprint,this will create a .psm file and then try importing the netlist.

 

[rupeshchannawar]

shorten the name of the parts and provide exact library Directory name in PADPATH and PSMPATH...