Orcad layout part renumbering

Status
Not open for further replies.
S

sagivitzik

Newbie level 6
Joined
Nov 18, 2007
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,364
Hi!
Is there a way to auto re-numbering the various layout parts from 1 (resistors, capacitances U's etc.)?

Thank you.
 

I think you can't do it.

You can auto re-numbering the parts on the schematic (Capture CIS), but in Layout the only way to re-numbering the parts is manually, but you'll "lost comunication" with the schematic (the schematic and the layout will not match).

Regards.
 

1-right click on part
2- click edit part
3- double click in the new page that open
4- part number visible=false
 

Hello,
you can renumber your schematic design by annotating and chose to reset all references to '?'. Then annotate the design and chose to number the references incremental.

Create a netlist and import the netlist in the PCB editor. In the editor update the components in the place tab off the functions menu.

Regards,
Bart.
 

Yes, you can!

After re-numbering in the layout, Back Annotate so that u dont lose link with the schematic!
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…