ricky_wcy
Junior Member level 3
Toys Questions
Condition
1. MCU is masked
2. When I press the button, MCU sends a 1sec pulse via 1 I/O to (transistors circuit) to drive the dc motor
Problem
1. dc motor has +/-15% tolerance, so the motor may stop in different position finally
Question
How can I stop the motor in certain position ?
I put a ON/OFF switch to the position where I wanna motor stop here
When dc motor rotates to switch , the switch condition change from open to short or vice versa
How can I use the switch condition to stop the motor
Any circuit with minimum cost can solve it (Difficult question)
Condition
1. MCU is masked
2. When I press the button, MCU sends a 1sec pulse via 1 I/O to (transistors circuit) to drive the dc motor
Problem
1. dc motor has +/-15% tolerance, so the motor may stop in different position finally
Question
How can I stop the motor in certain position ?
I put a ON/OFF switch to the position where I wanna motor stop here
When dc motor rotates to switch , the switch condition change from open to short or vice versa
How can I use the switch condition to stop the motor
Any circuit with minimum cost can solve it (Difficult question)