Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

On die termination VS on board termination

Status
Not open for further replies.

henry kissinger

Member level 2
Joined
Nov 19, 2021
Messages
44
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
442
I made transient simulations between on die termination (termination is after the wire bond) VS on board termination (termination is before the wire bond).
The result shows that the termination after the wire bond performs better with less ringing.

Does anyone know how to explain this phenomenon in simple words? I hope we are not getting into mathematical details. I prefer a conceptual explanation.
Thank you!!!

1669795705078.png
 

A little L and R are helping mellow out the C-dominated package parasitics which make you Z=50 into Z=(50+"stuff").

Bearing in mind that simple package and tline models are just that....
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top