Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Omron SP PLC's like SP10,SP15,SP20

Status
Not open for further replies.

monty_burns_007

Member level 2
Joined
Jun 4, 2001
Messages
46
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,288
Location
Springfield
Activity points
448
minilss software

Hi,

These are PLC's which are programmed with an operator panel.
Now i've got a software for this on PC, it's called MINILSS.
Problem was, i can't find the programming cable.
Even Omron didn't knew of this cable and software.
But I made my own version.
In attachment, the schematic of this cable.
For the soft, PM

Monty 8)
 

omron sp10

Here's the software guys, for those who were interested...
It runs good on older PC's like 486, Pentium 1 & 2.
On high speed computers like AMD K7 or PIII or PIV, use a delaying tool, otherwise you get a run-time error :(

Have phun :wink:

Monty 8)
 
omron sp20

Attached:

- Newer version of the minilss software
- Cpukill : a good delaying tool which is needed to avoid run-time errors on faster cpu's

Enjoy...

Monty 8)

/ File deleted
 
minilss

I search for manual for SP10. Can you help?
MiniLSS - Where have found you?
This text is translated automatically, it can be amusing.

Krzysiu
 

omron plc sp10

Krzysiu said:
I search for manual for SP10. Can you help?
MiniLSS - Where have found you?
This text is translated automatically, it can be amusing.

Krzysiu
I have manual sp20 .
give me your email ,i send you

i need scheme cable for Sp 10/20 plc to PC and minilss
 

omron sp20 software

porfirio said:
Krzysiu said:
I search for manual for SP10. Can you help?
MiniLSS - Where have found you?
This text is translated automatically, it can be amusing.

Krzysiu
I have manual sp20 .
give me your email ,i send you

i need scheme cable for Sp 10/20 plc to PC and minilss

[hr:88e40e9171]Thanks. My address is krzysiu(at)op.pl.
Look at post of monty_burns_007. Is it incorrect cable?
 

cable for plc sp10

Monty_burn_007

Im only a beginer and scored a sp20 and have no key pad to program it.But then I saw your program that might run on my old 486 win95 laptop.
So if it is possable could you please send me a copy of the pc program and the scematic of the cable so I can make one up and then give it a go.
Thanks
Derek :D
 

program omron sp 10

Hi just wondering in the schematic for cable to suit SP20 supplied in this forum there is no value for the zener diode. Does anyone know what it should be. Thanks, Glenn.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top