Madengnr,
Thank you. You are great. I download the file but it does not seem to show anything in my MWO which is a version 2002. Do you any reason for not being able to open it?
Best regards,
Wyn
Added after 3 hours 33 minutes:
Madengnr,
I am happy because I have had glimpses of it working.
What I have achieved has been to run the early version of the file i.e. DRO_CX_Sim_1a.zip and have had conversion at a few frequencies like 10.2 GHz, 14 GHz, 16 GHz even though the fend is 12GHz. Enough to give me comfidence that with your valuable help it will work.
However I could not make any sense out of the second file: DRO_CX_Sim_1b_50.zip. It has two files, one under 1b_50.zip and the other is 1b_75.zip.The latter can not be opened. The former shows different circuits for the DRO but I can not run any of them. The file is looking for data.
During uploading all files seem to be jumbled up. For instance the OSCAPROBE becomes horizontal and imbedded with the trnasmission line. I replace it with the one on my MWO that has an oscillator symbol but this did not help.
I wonder if you could send me all files to my e-mail addres?
I still have a lot to learn and what you have done has eased a lot of the brainache in my head. I am getting there.
Regards,
Wyn
Added after 58 minutes:
Madengnr,
I forwarded the two files to my email but they were the same.
Could you kindly send me copies of the files without zipping? my e-mail address is:nwintran@hotmail.com
Best regards,
Wyn