Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Nixie Tube Tester KIT - Retro Style

Status
Not open for further replies.
N

NixieTester

Newbie level 1
Newbie level 1
Joined
Jan 22, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
9
professional_nixie_tube_tester_33.JPG professional_nixie_tube_tester_01.JPG nixietester04.jpg nixietester03.jpg

I'm a DIY designer and I want to show my new project: Professional nixie tube tester kit.
More info: https://RetroTime.org

Parameters:
  • Testing & healing for all Nixie Tubes.
  • Auto & manual control.
  • Tube socket on board: SK-136 for nixie tubes IN12, IN15, ZM1100, etc.
  • External outputs - you can connect any tube using jumper cables: IN-18, IN-4, IN-12, IN-1, IN-2, IN-8, Z566M, Z573M, Z5700M, ZM1080 and more...
  • Current and voltage measurement option.
  • Voltage adjustment range: 130-200V.
  • Current adjustment: 1-10mA.
  • Frequency adjustment: 1-10Hz.
  • Reverse polarity protection.
  • Nixie Tester requires 12V; 1,5A DC power supply.



professional_nixie_tube_tester_41.JPG professional_nixie_tube_tester_02.JPG professional_nixie_tube_tester_13.JPG professional_nixie_tube_tester_08.JPG

professional_nixie_tube_tester_17.JPG professional_nixie_tube_tester_28.JPG professional_nixie_tube_tester_01.JPG professional_nixie_tube_tester_33.JPG

professional_nixie_tube_tester_37.JPG nixietester02.jpg nixietester01.jpg professional_nixie_tube_tester_14.JPG
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top