Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Do you mean NF = noise figure? Are you using another tool like Cadence with Hspice? If so, the directions here are pretty much what you need even though it uses Cadence and Spectre
**broken link removed**
you could use .measure to measure the noise voltage at needed frequency and .print+a formular for NF calculation. The formular depends on your netlist. The problem is how to make sure the formular is right.