PrasadT1001
Newbie
- Joined
- Jul 14, 2011
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Mumbai, India
- Activity points
- 1,301
Hello Everyone!
I am working on a project that requires a Wireless Tx-Rx.
The project that I'm working is a Railway Engine (a demonstrative model) that would be running on DC supply of 6-24Volts.
What I want to do is, the TX mounted at the Signal post should send a signal to the Locomotive.
Should I use two seperate Tx-Rx pairs for two different signals (No signal transmitted for Green, and two different frequencies for Red and Yellow).
The Receiver on the Locomotive should receive one of the signals, and accordingly the DC voltage will be stepped down to 6 V (for Yellow) and 0 V (for Red).
I want to reduce the amount and complexity of the programming as I am weak at it.
I would prefer to do it more of a Hardware-op'ed.
Will ASK or FSK work for this???
Thanks
I am working on a project that requires a Wireless Tx-Rx.
The project that I'm working is a Railway Engine (a demonstrative model) that would be running on DC supply of 6-24Volts.
What I want to do is, the TX mounted at the Signal post should send a signal to the Locomotive.
Should I use two seperate Tx-Rx pairs for two different signals (No signal transmitted for Green, and two different frequencies for Red and Yellow).
The Receiver on the Locomotive should receive one of the signals, and accordingly the DC voltage will be stepped down to 6 V (for Yellow) and 0 V (for Red).
I want to reduce the amount and complexity of the programming as I am weak at it.
I would prefer to do it more of a Hardware-op'ed.
Will ASK or FSK work for this???
Thanks