Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

need model for isolator or circulator (ferrite)

Status
Not open for further replies.

eladg

Full Member level 3
Joined
Jan 13, 2002
Messages
185
Helped
7
Reputation
12
Reaction score
3
Trophy points
1,298
Activity points
1,237
ferrite model

hello all
i need to desig cirulator at x-band 10%.
is there any model at ADS or design kit for ADS for this component ( the basic one), or i should built it only in 3-d em program.
olso, did some one built a model at hfss for this component ?
B.R
eladg
 

modelling ferrites circulators

you should simulate it in CST.
in the examples of the help of cst there is a ready model of isolator.
 
  • Like
Reactions: eladg

    eladg

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
ferrite core hfss modelling

there is in the passive Rf compmnets , a simple model for it ,

khouly
 

model eine isolators

Ansoft has a sample HFSS model of a circulator. Ask one of the application engineers for a copy.
 

    eladg

    Points: 2
    Helpful Answer Positive Rating
isolator and circulator

can u give me a design in hfss of circulator and isolat
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top