Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need help with using Xilinx EDK

Status
Not open for further replies.

r_p_sanna

Member level 3
Joined
Oct 18, 2004
Messages
65
Helped
6
Reputation
12
Reaction score
5
Trophy points
1,288
Activity points
569
Xilinx EDK

Hi,
can someone help me out with using a embedded development kit(EDK) ? I want to add an existing HDL design and a embedded software to a virtex-II pro device. Please help me out.
 

Re: Xilinx EDK

there are several ways :

the 2 main aproaches are :

1. the edk will be sub -model in your ise design => easiest, p@r is done in ise.

2. the hdl will be inside your edk design as ip core => complicated, but more open for s/w integration.
 

Re: Xilinx EDK

I'm trying to use powerpc in my system using EDK. there are a lot of options using the XPS. all i need is to interface it with my hardware. how do i go about to produce the minimum pin list ? also, is there something like a powerpc block diagram somewhere with pin list included? Will be very grateful for your help.

Thank you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top