DS89C450 LOADER VERSION 2.1 COPYRIGHT (C) 2002 DALLAS SEMICONDUCTOR<0D><0A>
> 89C450 LOADER VERSION 2.1 COPYRIGHT (C) 2002 DALLAS SEMICONDUCTOR
> R<0D><0A>
R<0D><0A>
LB:00 OCR:F7 ACON:1F CKCON:01 P0:FF P1:FF P2:FF P3:FF FCNTL:B1<0D><0A>
>W CKCON 1<0D><0A>
W CKCON 1<0D><0A>
<0D><0A>
> W ACON 00<0D><0A>
W ACON 00<0D><0A>
<0D><0A>
> K
<0D><0A>
<0D><0A>
>
>
Loading File C:\Assembler\450_HEL2.HEX
<0D><0A>
<0D><0A>
<0D><0A>
> Erasing Flash <0D><0A>
<0D><0A>
<0D><0A>
> K<0D><0A>
K<0D><0A>
<0D><0A>
> <0D><0A>
<0D><0A>
<0D><0A>
> ==> Completed
Loading Hex file...
L<0D><0A>
L<0D><0A>
:1000000075C7AA75C755C2D975F0FFD5F0FD7589BA.
:1000100020759852758780758DFA7588407550489F.
:1000200075514575524C75534C75544F75550A753D.
:10003000560D12004375F0FFD5F0FD12005FB4635A.
:10004000F480EF78077950E71200570975F0FFD573.
:10005000F0FDB293D8F1223099FDC299F599223082.
:0700600098FDC298E599220A.
:00000001FF.<0D>
Load complete.
<0A>
>
Kasp3r said:I already thought about it.. but I talked to one of my teachers from the University and he told me that there wouldn't be a problem to use it because it is a basic Serial communication system using only 3 lines. He said that if the programmer needed to use more pins to connect to the computer, it wouldn't be possible... but I don't know... I'just trying to gather some inofrmation to see if I can make it work...
Why is that??Kasp3r said:About your question, I advise you to forget the second DB9 connector in the pins 3 and 4 because you will not be able to use the UART on those pins.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?