Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

need help to use connect blue

Status
Not open for further replies.

ashishsircar

Newbie level 1
Newbie level 1
Joined
Sep 25, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
sydney
Activity points
1,288
we still cannot figure out how to transmit data..

we did not use the At commands to configure. we used Serial Port Adapter Wizard 2.1 (2nd Generation) to configure our serial port adapter
could u tell us the step by step process to set it up.. from start .. it would be real help..

we have the cB-OEMSPA13i-01 serial port adapter
is it possible to transmit data without using a microcontroller

in the kit there is just one connecter to connect one chip to a computer, how do we connect the other chip, or do we use a usb dongle
we need to know if there is an application that can be downloaded to send and receive data
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top