Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help on DSP hardware!!!!

Status
Not open for further replies.
S

student101

Newbie level 5
Joined
Dec 7, 2012
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,333
Hi all,

I am working on an audio project and I am looking into using DSP hardware to implement adaptive algorithms for active noise cancellation. I do not have a clue on how to precede on the selection and I dont know what to look for. I know that the A/D + DSP + D/A conversion of the hardware has to be less than 100 microseconds. I have about 3-4 8 bit inputs of audio sampled at 10 kHz and need to output an audio signal.

Any help is appreciated,
Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top