Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need help identifying lcd module on circuit board

Status
Not open for further replies.
R

robismyname

Full Member level 6
Joined
Jan 17, 2008
Messages
390
Helped
11
Reputation
22
Reaction score
9
Trophy points
1,298
Location
Central Florida
Activity points
4,603
Can anyone help me identify the lcd in terms of a part number. This lcd module is located on my rainbird esp-6tm controller. The lcd went partially bad and Im trying to replace the part instead of buying a whole new controller box. Pictures are provided.

18 pins on each side. approx. (1 5/8")L x (7/8")W
 

Attachments

  • IMG_20110516_161328.jpg
    IMG_20110516_161328.jpg
    1.1 MB · Views: 66
  • IMG_20110516_161145.jpg
    IMG_20110516_161145.jpg
    1.2 MB · Views: 65
  • IMG_20110516_161130.jpg
    IMG_20110516_161130.jpg
    1.1 MB · Views: 63
  • IMG_20110516_161100.jpg
    IMG_20110516_161100.jpg
    1.2 MB · Views: 61

LCDs are recognised by the segments they glow.
If you want to find a similar LCD you need to have segment this LCD used to glow. All segments.
This you can draw by hand also, just try to remember where which 7 segment / idetifiers / icons used to glow??
If you can post that someone can recognize the similar available LCD.

If you are lucky see below LCD if there is any printed inscription. for that you need to de-solder LCD
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top