Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need Help Getting Coverage Information

Status
Not open for further replies.

sleep

Newbie level 1
Joined
Sep 9, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
I'm using vcs with the "-cm line+cond+branch" option; however, I am having trouble figuring out where the coverage numbers are reported. I ran ./simv and then tried using vcs with "-cm_pp gui"; however, I am not seeing any of the coverage values. I tried vcs with "-cm_pp batch"; however, I'm getting some errors about this being a post processing tool.

Added after 23 minutes:

I've tried "./simv -cm line+cond+branch", and that allowed me to run both vcs with "-cm_pp gui" and "-cm_pp batch"; however, I don't know where the actual text report of the coverage numbers are kept. I would rather see a text report than utilize the gui for this. Please advise.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top