Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

need help for working on final year project

Status
Not open for further replies.

sam001

Junior Member level 2
Junior Member level 2
Joined
Apr 12, 2013
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
pakistan
Visit site
Activity points
1,442
We are two students. We want to make a final year project on monitoring system of power generators
in this project all the data of a remote station generator will be shown on a LCD at some other station for example
our generator is installed at somewhere else and we want to monitor its load voltage, fuel level, temperature etc these all parameters will be shown at our monitoring center wirelessly by LCD and also through SMS.
Switching off the generator in severe cases. As we are not using self generator, so we can use a lamp to indicate the switching on of generator. GSM interface will be used for wireless communication and or project will be based upon microcontroller.
kindly reply
 

we need guidance from the beginning ;(

- - - Updated - - -

we need guidance from the beginning ;(
 

Try to solve one by one measuring.

How you standing with ADC reading ?

Search forum for thermocouple, voltage reading (adc, voltage divider),...

I post somewhere in some thread SMS BOX project link, you can use this for sending SMS from generator to receiving station.

- - - Updated - - -

http://www.elektronika.ba/563/sms-box-projekt/
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top