Dear All,
Today I just received my GLCD Blue Colour with 18 Pin , order from Electronics Online Store in My Country.
I have searching for this GLCD to internet following on the back (board) JHD12864C-C3_D091201, but I am still not sure with the information.
Below is the specification from the Store :
============================
LCD 128X64 C BLUE
Graphic LCD 128x64 pixel type STN negative transmissive (blue) with white LED backlight
Spesification :
- Power Supply : Typical 5 VDC
- Interface : Paralel 8-bit
- Total Dot : 128 x 64 dots
- Type of LCD : STN
- Backlight : white
- Controller : KS0107-KS0108 controller or equivalent.
- View area : 62,0 (W) x 44,0 (H) mm
- Dimension : 78,0 (W) x 70,0 (H) x 14,3 (T) mm (outline)
============================
As well an information I have on internet........please refer to my attached document (1 pdf & 1 jpg).
So I am still need correct information from you guys....., because I want to implemented it to my MicroBoard.
Thanks.
SB.