need bascom sample code to tx over RF (AVR)

[allomani]

Hello,

i want a sample code to use atmega8535 to transfer over 433Mhz Rf

i tried UART to transfer between two microcontrollers and it works , but with RF it show nothing...

 

[nandhu015]

you need to do manchester coding and decoding to get proper reception

Nandhu

 

[allomani]

can you explain more please and if you have any BASCOM example code

 

[anandpv2009]

Hello,

i want a sample code to use atmega8535 to transfer over 433Mhz Rf

i tried UART to transfer between two microcontrollers and it works , but with RF it show nothing...

Ya...
try Manchester coding or ICs like HT12D, HT12E. But they are not good for data transmission. Only for remote control like applications.


Good Luck.

 

[allomani]

actually i tried the HT12D, HT12E but they didnt work with me with control also , i used 10kohm resistors for OSC , are they make a difference ? and how i connect them for data ? should i use 1 data pin only and use UART or there are another connections needed ?

and about another wireless solutions , which better for data ?

 

[nandhu015]

Use 51k and 1M resistor's. If you dont get 51K then series 47K + 3K9 resistors.

It is working. I checked it personally.

Nandhu